EM-6B2 电动式端子压接机 ELECTRICAL / PNEUMATIC TYPE TERMINAL CRIMPING MACHINE
EM-6B2 是用于非焊接电气接线的压接，具有省力、快捷等优点，是替代手动压接钳 选择，适用截面范围在 0.25mm2 至 10mm2 之间的冷压端头及剪切端子功能。随机配备7套精密的压线模，可随时根据需要更换压线模具，工作效率高、适应性强。
本产品采用定速马达驱动，无论是在压接力量上或压接速度上都具有高效率与高品质的优点，适用于中大数量端子压接使用，如果所需压接端子形式多样的话，更需选择本产品。
本产品通过 CE 认证，已申请外观 。
Type EM-6B2 is an ideal crimper for connection in cabinet.It is applicable for pre-insulated terminal crimping from 0.25mm2 to 10mm2 and Cu/Al cutting in 7mm. It is supplied with seven kinds of accurate and replaceable die sets.
The crimper has high working efficiency and wide application.
The crimper is driven by fixed speed motor so that it owns advantages of high efficiency and high quality not only in crimping force but crimping speed.
It is good for terminal crimping in large or medium quantity. If there are a lot of different kinds of terminals to be crimped, this crimper is the best choice.
工具参数Product parameters：
压接范围 Crimping range：0.25-10mm2
电压范围 Voltage range：AC 220/110
出力 Output：12.7KN
外形尺寸 Overall dimension：325×265×150mm
重量 Weight：12Kg
EM-6B2 备有多种样式的端子压接夹具可供选购 ( 钳口选型见第 71 页 )
Interchangeable crimping dies for selection, see page 71
电动/气动端头压接机可选配钳口 DIE SETS FOR SELECTION适用于 FEK-20M, FEK-06M, FEK-5ND, FEK-60EM, AM-10, EM-6B2
电动式端子压接机 ELECTRICAL / PNEUMATIC TYPE TERMINAL CRIMPING MACHINE
EM-6B2 是用于非焊接电气接线的压接，具有省力、快捷等优点，是替代手动压接钳 选择，适用截面范围在 0.25mm2 至 10mm2 之间的冷压端头及剪切端子功能。随机配备7套精密的压线模，可随时根据需要更换压线模具，工作效率高、适应性强。
本产品采用定速马达驱动，无论是在压接力量上或压接速度上都具有高效率与高品质的优点，适用于中大数量端子压接使用，如果所需压接端子形式多样的话，更需选择本产品。
本产品通过 CE 认证，已申请外观 。
Type EM-6B2 is an ideal crimper for connection in cabinet.It is applicable for pre-insulated terminal crimping from 0.25mm2 to 10mm2 and Cu/Al cutting in 7mm. It is supplied with seven kinds of accurate and replaceable die sets.
The crimper has high working efficiency and wide application.
The crimper is driven by fixed speed motor so that it owns advantages of high efficiency and high quality not only in crimping force but crimping speed.
It is good for terminal crimping in large or medium quantity. If there are a lot of different kinds of terminals to be crimped, this crimper is the best choice.
工具参数Product parameters：
压接范围 Crimping range：0.25-10mm2
电压范围 Voltage range：AC 220/110
出力 Output：12.7KN
外形尺寸 Overall dimension：325×265×150mm
重量 Weight：12Kg
EM-6B2 备有多种样式的端子压接夹具可供选购 ( 钳口选型见第 71 页 )
Interchangeable crimping dies for selection, see page 71
电动/气动端头压接机可选配钳口 DIE SETS FOR SELECTION适用于 FEK-20M, FEK-06M, FEK-5ND, FEK-60EM, AM-10, EM-6B2
